UTD-20S1 Engine

BMP-2 APC Engine
Battle Tank Engine BMP-2

UTD-20S1 Engine

The UTD-20S1 battle tank engine is a six-cylinder four-stroke high-speed diesel engine with direct fuel injection and high-temperature liquid cooling. The UTD-20S1 motor is intended for installation on the BMP-2 infantry fighting vehicle.

Differences

UTD-20S1 tank engine has the following differences from the UTD-20 diesel engine:

  1. There is a system of combined fuel drain from injectors.
  2. There are covers for access hatches to the nozzles; now they have holes for the fitting connecting the nozzle with the system pipeline, and the nozzle itself accordingly has a modified upper nut for connecting the fitting.
  3. The presence of a system for ensuring a cold start of the engine, it is also a BFP system (nozzle-less flare heating of intake air).
  4. The BFP system is designed to start the engine in emergency cases at ambient and vehicle temperatures down to minus 20 ° C, when it is not possible to warm up the power plant with a pre-heater in time.
ItemProductDescriptionPDFFree Engine QuoteEmail BCS
InformationUTD-20S1Engine BMP-2

SpecificationsDescription
ModelUTD-20S1
SuitableBMP-2
Number Of Cylinders6
Recommended Operating Frequency Variation Range S-125+1,6 (1500+100) rpms
Specific Fuel Consumption, No More Than238,5  (G / Hp H)
Specific Oil Consumption, Not More Than8,15  (G / Hp H)
Overall Dimensions790 x 1150 x 742 mm
WarrantyNew: Full Manufactures Warranty
Used: 12 Months or 350 Hours