Mini Pipe Inspection System 15 mm to 40 mm

15 mm to 40 mm Borescopes
Small And Extra Small Pipe Inspection

Mini Pipe Inspection System 15 mm to 40 mm

The BCS Mini Pipe Inspection System (MPIS) is a set of optical measurements heads, fixtures and supporting rings which allows to scan a profile of internal surface of small and extra small pipes, stators, cylinders, etc. This miniature optical inspection system comes in handy for smaller pipework. For diameters 15 mm to 40 mm.

Mini Pipe Inspection System 15 mm to 40 mm

Straightness measurement is performed with an integrated PSD module that measures deviation from a reference laser beam. An external laser source is needed when a straightness (alignment) option is ordered. A straightness option is available on request for a few models of ROTs.

Scanning is Performed by a Rotating Laser Sensor

Measurement heads have onboard a rotating laser scanner, encoder and straightness detector*. It combines the sensors data to get the full 360 ̊ cross-sectional profile of the pipe or stator.

To measure the pipe, the probe is consistently moved to the required cross‐section. Measured data and is sent to PC where the algorithms calculate such parameters as inner diameter, ovality, deviation of the profile from the reference, etc.

ItemProductDescription / DiametersPDFFree Optics QuoteEmail BCS
InformationMini Pipe Inspection System15 mm to 40 mm

Basic Specification

  1. Inspection and Identify
    Any Holes, Pipes, Cylinders Barrels and Bores with damage with magnification.
  2. Measures the Following Parameters
    Rifling.
    Flank angles.
    Lands and grooves.
  3. Identify and Measure
    Surface defects.
    Cracks and pitting.
    Holes and barrel wear.
    Erosion and corrosion of the gun barrel.
    Everything larger than 0.01 can be measured.
    Poles engraved with depth measurement graduations.
  4. Results
    The results are also exported to computer for analysis at later date.
    Digital grid overlay for determining the size of artifacts and objects.
    Measurements displayed in real time with location and bore information.
  5. Accuracy
    It combines the sensors data to get the full 360 ̊ cross-sectional profile of all smooth bore and rifled barrels, with a +/-0.01 mm accuracy.

Optional Extras

  1. Barrel or Bore Straightness
    Will check non-straightness of all barrels and bores.
  2. Chromium Coating
    The sensor measures the barrel and bore coating thickness.
  3. Self Moving Option
    Converts system to automatic  mode.

Suitable For

Suitable For

  • Military Gun Barrels 15 mm To 40 mm.
  • Smooth And Profiled Pipes 15 mm To 40 mm.
  • Bores, Barrels, Stators  And Cylinders For All 15 mm To 40 mm.
  • Quality And Geometric Dimensions Check During Barrel Maintenance, After Long Term Storage, As Well As Periodic Inspections.

Note:

All solutions are unified, any box can be upgraded in the future to cover more measurement tasks.

Accuracy

Specifications BCS Mini Pipe Inspection System (MPIS)

Inner Barrel or Bore Diameter:± 0.01 mm
Deviation From Roundness:± 0.01 mm
Deviation Of Shape Of The Profile:± 0.03 mm
Width Of The Elements Of A Profile:± 0.05 mm
Barrel or Bore Length:± 2 mm
Max Length of Barrel or BoreUp to 5 mtrs

Caliber Range

Supports visual examinations of the following small and extra small pipes, stators, cylinders, bores.

  • 15mm.
  • 20mm.
  • 25mm.
  • 30mm.
  • 37mm.
  • 40mm.
  • Up to 10 mtr length.(theoretically can be longer).

Harsh Weather

Optional Extra

We can apply this at the manufacturing build process.

  • NanoTech Circuit Coating

Using BCS NanoTech circuit board protection, you can protect the borescopes circuits, PCBs, and other electrical components from damaging elements.

Ongoing protection of electrical and electronic equipment from exposure to all forms of water; steam, humidity, condensation, fog, rain, flooding, chlorinated and salt water.

This superior protection prevents the need for costly circuit replacements. Our NanoTech Circuit Coating is also ideal for protecting and waterproofing borescope expensive electronics.

  • NanoTech Metal Protection

Can also be applied locally, in the field or maintenance depot.

NanoTech Metal is a clear, nanotechnology enabled coating engineered specifically for all types of metal surfaces. The coating forms an invisible, long lasting bond with the surface to repel water and prevent stains and the build-up of dirt and other contaminants.