Military Grade Solvent & Degreaser
Military-Grade Solvent
NATO Code 6850 17 116 8736
Military Grade Solvent (MGS)
Military Grade Solvent & Degreaser (MGS) quickly and deeply removes from the surfaces of automatic and other weapons and mechanical parts carbon deposits, gunpowder, thickened and hardened oils in the cold state`
The product also includes a special additive to prevent flash rust from forming before parts are re-lubricated. What’s more, after wiping down gun parts, Military Grade Solvent & Degreaser (MGS) leaves virtually no residue.
Military Grade Solvent
Suitable For Small arms weapons: – 5.56 mm up to 15.2mm.
All other fully automatic weapons: – M1 – M16 – AR15 – 9 mm – 40 caliber weapons.
| MilSpec Specifications | Results |
| Colour: | Blue |
| Odour: | Characteristic |
| Density: | 0.99 g/cm3 @20°C: |
| Working Temperature: | Max 80°C |
| pH Level: | 10.5 – 11.5 |
| Shelf Life: | 3 years Subject to Storage Conditions |
| Evaporation Speed: | Not Determined |
| Vapour Pressure: | 23 hPa @20°C |
| Item | Product | Description | Free Gun Oils Quote | Email BCS | |
| Information | Milspec Oil | MGS |  |  |  |
Features & Benefits
Safe for rubber and plastic parts.
There is no sharp chemical smell.
Quickly cleans and degreases all types of weapons.
Cleaning & degreasing power for most light duty jobs Safe to use; no harsh solvents.
MGS – Military Grade Solvent product shall conform to the NATO CODE 6850-17-116-8736.
Safety
May be shipped as a non-regulated cleaning compound
Rinses freely and is compatible with most oil water separators.
This product contains quality surfactants, wetting agents, emulsifiers, cleaners, and rust inhibitors.
Suitable For
Small arms weapons: – 5.56 mm up to 15.2mm.
All other fully automatic weapons: – M1 – M16 – AR15 – 9 mm – 40 caliber weapons.
Other Applications
Daily cleaning and degreasing of surfaces such as stainless steel, plastic, marble, ceramic and textiles. Suitable for ultrasonic baths. Degreasing of glass surfaces, tools and surfaces with organic dirt, especially fatty contamination in the food industry. Suitable for cleaning programs under HACCP systems.
It is also used for pre-treatment of metal surfaces before burnishing, plating, painting, etc.
Sizes Available
Custom: 20ml to 1,000L IBC
Plastic Containers or Aerosol Cans
Subject to Min Order Requirements
Instructions for Use
- Weapon Cleaning
- Make sure firearm is cleared and made safe prior to disassembly.
- Spray BCS Military-Grade solvent down the bore and allow it to soak for 2-3 minutes.
- Soak the bore brush with BCS Military-Grade solvent and run it down the bore passing it through several times in order to loosen fouling.
- Soak a patch with BCS Military-Grade solvent and run it through the bore.
- Run a dry patch or patches through the bore until the patch comes out clean.
If Barrel Still Fouled (Repeat steps 2 thru 5 two more times).
- Saturate two (2) cotton patches with BCS Milspec CLP and pass them through the barrel. Allow to soak for 3-5 minutes in the barrel.
- Wet a nylon brush with BCS Milspec CLP and stroke the inside of the barrel 6-8 times.
This is followed by another (1) wet patch and then two (2) dry patches. - Repeat Steps 4 thru 5 until bore is clear of fouling and patches come out clean.
- Soak a patch with BCS Nano Weapon Gun Oil and pass it through the bore to condition and protect the bore (this lubrication option is only recommended for storage reasons.
- Metal Surfaces and Worktops
Apply directly and allow it to work for several seconds (20 – 40 seconds depending on contamination).
A longer contact time will result is a better cleaning action. Remove with a clean, damp cloth then wipe with a dry cloth.
- Glass and Ceramic
Saturate the area to be cleaned and wipe with a dry cloth.
For food industry utensils and surfaces: apply the product, allow it to work, and then rinse off.
Do not apply on painted surfaces or polycarbonate without a prior test.
Do not mix different cleaners. Avoid inhaling sprayed product.
Using the required quantity saves costs and minimizes environmental impacts.